Elba DOMINO COOKING HOBS Informações Técnicas descarregar pdf (Página 24)

GAS SECTION

7

7

TYPES OF GASES

The gases normally used may be

grouped, in view of their features, in

three families:

- L.P.G. (in cylinders) G30

- NATURAL GAS (methane) G20

- CITY GAS G110

INSTALLATION

The appliance is predisposed and adjust-

ed to operate with the gas indicated on

the specifications plate applied onto the

appliance.

If the appliance must be operated with a

gas different than that indicated on the

plate, it is necessary to execute the fol-

lowing operations:

– gas connection

– replacement of the injectors

– regulating of the minimum

Gas connection

The connection must be executed by

qualified technician according to the rele-

vant standard.

The fitting (fig. 7.1) is made up of:

✓ 1 elbow fitting “A”

✓ 1 adapter “B” for natural or city gas

✓ 1 adapter “C” for L.P.G.

✓ gaskets “D”, “E” and “F”

The hob must be installed in a room with

adequate ventilation.

Gas connection for:

Natural gas G20 or city gas G110

✓ Remove the adapter “C” using two

spanners.

✓ Connect the cooking hob to the gas

net by a suitable rubber tube (inside

diameter 13 mm).

Make sure the tube is snugly fit at both

ends and use a standard tube clamp

(not supplied) to fasten it.

L.P.G. (in cylinders) G30

✓ Fit up the adapter “C” to the adapter

“B” interposing gasket “E”. Tighten

using two spanners.

✓ Connect the cooking hob to the

cylinder pressure regulator by a

suitable rubber tube (inside diameter

8 mm).

Make sure the tube is snugly fit at both

ends and use a standard tube clamp

(not supplied) to fasten it.

24

D

B

F

A

E

C

Fig. 7.1

1 2 ... 19 20 21 22 23 24 25 26 27 28 29 30 31 32

Comentários a estes Manuais

Sem comentários