Elba DOMINO COOKING HOBS Informações Técnicas descarregar pdf (Página 22)

ELECTRICAL PLATES AND VITROCERAMIC COOKING HOBS

490

510

270

288

+ 0

– 2

+ 0

– 2

Fig. 6.8a

490

510

270

288

+ 0

– 2

+ 0

– 2

Fig. 6.8b

TECHNICAL INFORMATION

FOR THE INSTALLER

Before installing the cooktop, remove

the protective film.

These cooking hobs are designed to be

embedded into kitchen fixtures measur-

ing 600 mm in depth and from 20 to 40

mm thick, for 2 electrical plates hob, and

from 30 to 40 mm thick for vitroceramic

hob.

In order to install the cooker top into the

kitchen fixture, a hole with the

dimensions shown in figs. 6.8a and 6.8b

has to be made, keeping in consideration

the following:

– within the fixture, between the bottom

side of the cooker top and the upper

surface of any other appliance or

internal shelf there must be a

clearance of at least 30 mm;

– the cooker top must be kept no less

than 50 mm away from any side wall;

– the cooker top must be kept at a

distance of no less than 50 mm from

the rear wall.

– there must be a distance of at least

650 mm between the hob and any wall

cupboard or extractor hood positioned

immediately above (see fig. 6.9).

650 mm

50 mm

450 mm

Fig. 6.9

– the coatings of the walls of the unit or

appliances near the cooktop must be

heat resistant ("Y" protection against

heating in compliance with standards

EN 60335-2-6).

Do not instal the appliance near

inflammable materials (eg. curtains).

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 31 32

Comentários a estes Manuais

Sem comentários

Elba DOMINO COOKING HOBS Informações Técnicas Página 22

Comentários a estes Manuais

Manuais e produtos relacionados com Fogões Elba DOMINO COOKING HOBS